Clear & Simple 3 Pregnancy Test Strips Home Pregnancy Test

Features: Over 99% Accurate. Results Within 5 Minutes. For Home Use. Easy to Use

Storage Conditions: Max Temp 30°C, Min Temp 4°C

Other Information: Sensitivity 20mIU hCG / ml

Preparation and Usage: How to Test: Please read all the information in the leaflet enclosed before testing. Collect a urine sample in a clean dry container. Put the test strip vertically into the urine sample making sure that the arrows are pointing down. Do not allow the urine level to go above the max line marked on the strip. Leave the test strip in the urine sample for 10 seconds. Take the strip out, lay it flat and read the result within 5 minutes. For the first few seconds after wetting you should see the liquid moving up the test area causing it to go light purple. As the purple fades the control line will appear as a strong line and the result line if present will appear below this.

You will need a clean dry container to collect a urine sample.

Reading the Result: Positive Result: If two coloured lines appear on the test strip, you are pregnant. One line may appear lighter than the other, but they will both be the same thickness. A faint line is more likely to occur when you are testing early and your hCG levels are low.

Negative Result: If only one coloured line appears on the test strip this is a negative result and you are either not pregnant or you may have tested too early. If you are unsure repeat the test in 48 hours with a new test strip.

Invalid Result: If no lines appear anywhere on the test strip or if only the test line appears, the test has not worked properly and is invalid. This is usually due to the strip not being wet enough.

Important: Read your result within 5 minutes of doing the test. Disregard any changes to the result after this time. Discard the used test with your normal household waste. Put the urine sample down the toilet.

Storage Type: Ambient

Single Use Only