Gorilla Epoxy is a two-part adhesive with a fast 5-minute set time and an impact-tough formula. It delivers a strong, water-resistant bond that dries crystal clear, making it ideal for repairs and DIY projects. Use the easy-to-use syringe to dispense equal parts resin and hardener, then apply to clean, dry surfaces for maximum grip.
Gorilla Epoxy Resin and Hardener Impact-tough formula 5-Minute set time Withstands moderate exposure to water
Gorilla Epoxy sets in just 5 minutes, delivering a strong, durable bond which dries crystal clear. The two-part, gap-filling formula is water resistant and even withstands extreme temperatures. The easy-to-use syringe dispenses an equal amount of resin and hardener, that when mixed together creates a permanent bond on a wide range of materials.
Preparation and usage
Directions
Prepare All surfaces to be bonded should be clean and dry. To improve adhesion, roughen smooth surfaces with sandpaper before gluing. Ensure your work area is well-ventilated and protected from spills. Remove stir stick from middle of plunger. With nozzle pointing upward, snap the sealing cap off the syringe then eliminate any air by slowly pushing plunger until resin and hardener reach the tip.
1 Dispense & Mix Dispense resin and hardener onto a clean, disposable surface until they are both flowing equally. Even amounts of the resin and hardener can then be dispensed into a disposable mixing tray. The package blister can be used as a mixing tray for the first use. Stir the mixture for at least 20 seconds, until it is uniform. As you mix, you will notice that the epoxy warms up - this is a reaction that occurs as the resin and hardener combine.
2 Apply Apply mixture to surface within 5 minutes. Bond strength will decrease the longer you wait to apply. Remove any excess glue immediately from project surface with a dry cloth.
3 Grip To achieve maximum bond strength, clamp surfaces together and leave undisturbed for 30 minutes. Full cure achieved in 24 hours. Bond set time: 5 Minutes to apply and position. Handling: 30 Minutes undisturbed. Full cure: 100% in 24 hours for load bearing weight. Application in cooler temperatures may cause longer cure times.
Storage To close, slightly pull back on plunger, wipe tip with a dry cloth and then replace cap tightly. Store in a cool, dry place away from children and animals.
Country of origin Produce of: Made in USA
| Pack size | 25 ML |
| Product Height | 21.8CM |
| Product Width | 3.8CM |
| Product Weight | 0.08KG |
| Manufacturer Warranty Period | Not Known |
Safety information
Gorilla Epoxy Resin and Hardener
Gorilla Epoxy (Hardener)
Contains: Poly[oxy(methyl-1,2-ethanediyl)], -hydro--hydroxy-, ether with 2,2-bis(hydroxymethyl)- 1,3-propanediol (4:1), 2-hydroxy-3-mercaptopropyl ether and 2,2,4(or 2,4,4)-trimethylhexane-1,6-diamine.
CLP Regulation - Corrosion
CLP Regulation - Exclamation Point
DANGER: Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage. Harmful to aquatic life with long-lasting effects.
Gorilla Epoxy (Resin)
Contains: Bis-[4-(2,3-epoxipropoxi) phenyl]propane.
CLP Regulation - Exclamation Point
CLP Regulation - Environment
WARNING: Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Toxic to aquatic life with long-lasting effects.
If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing vapours. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. Dispose of contents/container in accordance with local, state or national legislation.
Recycling Tube. Not Recyclable
