Apply Gorilla White Grab Adhesive in a zig-zag pattern and press surfaces together within 10 minutes for a flexible, gap-filling bond. This heavy duty adhesive works indoors or outdoors, withstanding extreme temperatures from -40°C to 93°C. Made in the UK by a trusted brand, it is a dependable choice for tough repairs.
Gorilla Grab Adhesive is so versatile, it grabs virtually anything. The flexible, gap filling formula provides a heavy duty bond that'll last.
Gorilla Grab Adhesive is 100% waterproof and withstands extreme temperatures, meaning you can use it indoors or out, for an extra-tough bond.
| Pack size | 200 ML |
| Country of origin | Produce of: Made in UK |
| Storage | Store in a cool, dry place. |
| Recycling | Tube. Not Recyclable |
Preparation and usage
Directions
All surfaces should be clean, dry and free of dirt, grease, oil and old adhesive. Remove cap and foil seal from tube before first use.
1 Squeeze adhesive onto one surface in a zig-zag pattern. When working on uneven surfaces, use enough adhesive to fill gaps. Best results achieved if applied above 5°C.
2 Within 10 minutes of application, press surfaces together and hold for 20-60 seconds. Heavy items may require temporary support and mechanical fastening. Full cure achieved in 24 hours.
3 Remove any excess adhesive immediately with a dry cloth. White spirit may be used according to manufacturer's instructions.
Remove excess adhesive with a dry cloth and replace cap tightly to prevent adhesive from curing.
Grab adhesive is paintable for up to 30 minutes after application and will fully cure in 24 hours; this may take longer in lower temperatures or humidity and/or when bonding non-porous surfaces. For best results when painting, apply paint within 30 minutes of applying adhesive. Apply paint with reduced brush/roller pressure to avoid disturbing adhesive.
Service temperature: -40°C to 93°C.
Safety information
Gorilla Grab Adhesive White
Contains: N-(3-(trimethoxysilyl)propyl)ethylenediamine; Trimethoxyvinylsilane; 3-(trimethoxysilyl)propylamine; [3-(2,3-epoxypropoxy)propyl]trimethoxysilane
WARNING. Causes serious eye irritation. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Wear protective gloves/ protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Dispose of contents in accordance with local, state or national legislation.
Contains: N-(3-(trimethoxysilyl)propyl) ethylenediamine, Trimethoxyvinylsilane. May produce an allergic reaction.
