For a smooth update to interior wood and metal surfaces, apply Johnstone's Eggshell Paint with a brush or roller. This water-based, low odour formula delivers a non-drip, non-yellowing finish that is touch dry in 1-2 hours. It comes from PPG Architectural Coatings UK, a trusted British paint manufacturer.
Highlights
About this product
Johnstone's Eggshell is a tough & durable, low sheen finish for interior wood and metal including skirting boards, doors, radiators and staircases. The water based, low odour formulation is non-yellowing and quick drying.
Pack size
0.75 L
Preparation and usage
Ensure good ventilation during application and drying. Stir well before use and apply by brush or roller. Apply liberally and evenly for a smooth finish. Under normal conditions the paint is touch dry in 1-2 hours. Allow 4 hours before applying a second coat. Do not apply when air or surface temperature is below 10ºC or in damp conditions.
750ml of Johnstone's Quick Dry Eggshell will cover up to 9 square metres depending on the nature and porosity of the surface.
Other information
PROTECT FROM FROST
Replace lid firmly after use. Remove as much product as possible from application equipment before cleaning. Clean all equipment immediately after use in warm soapy water and rinse thoroughly.
To avoid the risk of spillage, always store and transport in a secure upright position.
Do not empty waste paint into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings.
Safety information
Keep out of the reach of children. If medical advise is needed, have product container or label at hand. Dispose of contents and container in accordance with all local, regional, national and international regulations.
Contains 1,2-benziosothiazol-3(2H)- one and reaction mass of 5-chloro-2methyl-2Hisothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) and 2-methyl-1,2-benzothiazol-2(2H)-one.
May produce and allergic reaction.
Safety data sheet available on request.
Contains a biocidal product; BIT, CMIT/MIT (3:1), MBIT, IPBC
Manufacturer
PPG Architectural Coatings UK Limited Huddersfield Road, Birstall, Batley, West Yorkshire, WF17 9XA
