The Nuby RapidSterilise Plus UV Steriliser uses powerful UV light to kill 99.9% of bacteria in just minutes, offering a chemical-free sterilisation solution for baby bottles. Designed for use with Nuby RapidCool and RapidBottle, this portable device provides up to 30 uses per charge, making feeding time simple and stress-free.
Sterilising shouldn't feel like a full-time job, and when hunger strikes, Nuby knows the pressure you're under as a new parent. That's why they designed RapidSterilise + so you can sterilise your RapidCool and RapidBottle, anytime, anywhere, without boiling water or harsh chemicals. For parents who need speed and safety, RapidTeam is your go-to for safe and fast formula preparation.
RapidSterilise+ uses UV light to kill 99.9% of bacteria in minutes, because boiling water and baby bottles - not the best match. With up to 30 uses per charge, an auto shut-off feature and a wipe-clean finish, this portable steriliser is designed to make every stage of feeding simple and stress-free.
To use RapidSterilise+ with RapidCool, place RapidSterilise+ on top of your RapidCool (no need to screw it on) and then put the RapidCool digital lid on top of the RapidSterilise+. Then press the start button to begin the 1 minute sterilisation cycle.
To sterilise RapidBottle with RapidSterilise+, take the teat without the screw ring and place it upside down into the electroplated bottle cap and put the cap (with the teat inside) on top of RapidSterilise+. Then place RapidSterilise+ on top of the glass bottle and press start to run the 1 minute sterilisation cycle. When it's done, remove the teat and attach the screw ring, then place the teat and screw ring together on the RapidSterilise+, cover witht he electroplated cap and press start again to sterilise for another 1 minute.
When you're running on three hours' sleep, every minute counts - and RapidSterilise+ makes sure you don't waste them.
RapidSterilise+ is specifically designed to work with RapidBottle and delivers the enhanced UV power needed to kill 99.9% of bacteria. Earlier RapidSterilise models are not suitable for RapidBottle, as they do not provide sufficient coverage for the teat. RapidSterilise can still be used with RapidCool.
RapidSterilise+ features additional UV light bulbs, allowing for deeper, more thorough sterilisation of RapidBottle teats. This extra power is what makes it suitable for use as a RapidBottle Steriliser, whereas the original RapidSterilise is not designed for this purpose.
No. RapidSterilise+ is designed to fit RapidBottle only. RapidBottle caps feature a special electroplated coating that reflects UV light evenly around the teat, helping ensure effective sterilisation. Using other bottles may result in an insecure fit and reduced performance from your baby bottle steriliser.
Due to its higher-powered UV system, RapidSterilise+ provides up to 30 uses per charge. Recharge using the supplied USB-C cable to keep your steriliser ready for everyday use.
A full sterilisation of RapidBottle takes 2 minutes. The process runs as two 1-minute cycles to ensure all internal surfaces are treated, supporting quick, reliable sterilisation without heat or steam. Sterilising RapidCool takes 1 minute with a 1 step process.
Yes. Bottles should always be cleaned before sterilising to remove residue of breast or formula milk. Ensure all parts are fully dry before placing them onto the unit, as moisture will damage the unit.
RapidCool requires 3 hours to reset after any contact with heat, as RapidSterilise+ does not emit heat, this will not affect the reset process. You should therefore just wait 3 hours from your last feed or washing with hot water, before using RapidCool again.
Simply place your RapidSterilise+ on top of your RapidBottle or RapidCool. No need to screw it into place, just sit it on top.
Wipe clean with a damp cloth only and leave open to dry. Do not use bleach or harsh cleaning agents. Do not submerge in liquid and always ensure your RapidBottle teat and RapidCool digital lid are dry before placing on top of RapidSterilise+.
