Stylpro Wavelength LED Face Mask

The STYLPRO Wavelength LED Face Mask is a skincare device that uses red (633nm) and blue (415nm) LEDs to emit specific wavelengths of light onto the skin and near infrared (830nm) to promote skin health.

Suitable for adult children 16 years and over. Not suitable for pregnant women.

HOW TO ASSEMBLE:

• Remove all parts of the LED Face Mask from the packaging. This includes the remote, eye comfort pads, black straps, and LED Face Mask.
• Place the eye comfort pads into the eye holes and ensure they are securely attached. See 'R' for right and 'L' for left on the eye comfort pads.
• Attach the straps into the loops at the side of the LED Face Mask. Ensure the larger end of the strap is facing upward and secure to the crown of your head.
• Plug the wire attached to the LED Face Mask in to the top of the remote. The LED Face Mask will not work if the remote is not plugged into the mask.

CHARGING: Insert the USB-C cable (provided) into the port at the top of the remote. Attach to a USB-C friendly power source. The battery icon will show a loading sequence when charging. If the controller fails to charge or turn on, a reset is required. Press and hold both buttons for 20 seconds and then immediately begin charging the device, the battery icon should appear. Repeat if unsuccessful.

How to use:

• Once your LED Face Mask is fully assembled, place the LED Face Mask onto your face and securely attach the straps around the crown of your head.
• Long press the On/Off button on the remote. This will turn on to the 'Anti-ageing' mode.
• Short press the Mode button to switch to the 'Target' mode.
• Short press the Mode button to switch to the 'Recovery' mode.
• Short press the Mode button to switch to the 'Balance' mode.
• Once you have chosen your preferred Mode, enjoy a 10 minute session.
• To turn off your LED Face Mask before you have completed your 10 minute session, long press the On/Off button.

CLEANING: Wipe down the area of the mask that has come into contact with the skin with a disinfectant wipe after every use.

MODES:

• Mode 1: Anti-ageing. The Anti-ageing mode has red LED light with a wavelength of 633nm and near-infrared light with a wavelength of 830nm. This mode provides a revitalizing experience for your skin. Red and Infrared LED light therapy boosts your skin's natural collagen production to firm the skin, improve skin texture, reduce the appearance of wrinkles and improve overall appearance.
• Mode 2: Target. Blue light therapy promotes a clearer, smoother complexion. Also suitable for people with blemish prone skin.
• Mode 3: Recovery. Near-infrared light penetrates deeper than red light, stimulating collagen production and promoting cell regeneration.
• Mode 4: Balance. The Balance mode is a combination of red LED light with a wavelength of 633nm, blue LED light with a wavelength of 415nm and near-infrared with a wavelength of 830nm. This mode can help to stimulate collagen production and is the perfect mode for an overall boost for the skin. This mode has the highest amount of light energy of all 4 modes. This mode addresses multiple cosmetic skincare concerns with a balanced approach.

SAFETY INFORMATION: Important! Do not look directly into light. Always use with the eye pads well seated onto your face to minimize light into your eyes. LED Light products are not intended to diagnose, treat, cure, or prevent any disease. Our products are low-risk, general wellness / fitness products that do not require medical clearance. Please conduct a spot test before use. They are designed as General Wellness home use products only. LED Mask should not be used more than once per day on the same setting. After using the mask, you may apply a moisturizer or other skincare products as part of your routine.

SAFETY CONSIDERATIONS: Use of a LED Light therapy mask in any way other than those described in this manual voids the warranty and could result in serious injury. The LED LIGHT THERAPY MASK is an electrical device. To avoid electric shock, adhere to the following safety considerations:

• Do not get your device wet or submerge your device in water.
• Do not wash electrical parts with water or liquids.
• Do not directly touch the device or switches with wet hands.
• Do not apply or touch the device to wet or damp skin.
• Do not pull, carry, or lift the device by its charging cord. If the charging cord is damaged, do not use the device.
• Do not use the device if it has been dropped, left outside, or has encountered water or liquids.
• Do not use on or near heated surfaces.
• Do not modify, or attempt to modify or repair, this equipment. There are no user serviceable parts.
• Do not use or store your device in hot temperatures that are or can exceed 54°C (130°F).

Important info: Country of Origin: China. Address: UK: STYLIDEAS Ltd, AMShold House, Goldings Hill, Loughton, Essex, IG102RW, stylpro.co.uk