Waitrose Essential Liquid Appliance Descaler 500ml

Waitrose Appliance Descaler is specially formulated to remove limescale from a wide range of appliances such as kettles, coffee machines, showerheads and irons.

Warnings:

• Causes serious eye irritation.
• Keep out of reach of children.
• Wash hands thoroughly after handling.
• Wear protective gloves/protective clothing/eye protection/face protection.
• IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• If eye irritation persists: Get medical advice attention.
• If medical advice is needed: Have product container or label at hand.
• Do not mix with other household chemicals.
• Use only as directed.
• Do not use on enamel, marble or natural stone surfaces.
• Do not use on gold or precious metal fittings.
• Keep out of reach of Children.

Storage: Store bottle upright in a safe place. Protect from extremes of temperature.

Usage:

• Kettles: Half fill the kettle with water, bring to the boil and then unplug. Add 1/3 of a bottle of descaler and leave for 30 mins or overnight. Flush out and rinse thoroughly before use.
• Coffee Machines: Add 100ml of descaler to 500mls of water and add to the machine reservoir. Turn on and run through the machine. Rinse afterwards with 2 full reservoirs of water.
• Irons: Check manufacturer's instructions to ensure iron is suitable for descaling. Carefully heat the iron until hot, then unplug and turn down the temperature dial to 'off'. Add 50ml of descaler to the water chamber and top up with water. Hold the iron over a sink or bowl and depress the steam button until the iron is empty. Repeat with fresh water twice. Test iron on an old piece of fabric before next use.
• Shower Heads: Add 50ml of descaler to a jug of hot water and immerse the shower head. Leave for 30 minutes and rinse jug and shower head thoroughly. Repeat if required.

Origin: Germany

Recycling:

• cap (Plastic - PP (Polypropylene))
• bottle (Plastic - HDPE (High Density Polyethylene))
• insert (Plastic - LDPE (Low Density Polyethylene))
• label-glued (Plastic - PP (Polypropylene))